Butterfly Valve Basics

What is a Butterfly Valve

A butterfly valve, is a quarter turn ,rotary motion valve that is used to stop, regulate, and start fluid (air,gas,water,steam) flow in pipes. Butterfly valves are easily and quickly operated because of 90^o rotation of disk from a fully closed to fully opened position.That,s why butterfly valves are also called quick turn valves.

Butterfly Valve How It works

Butterfly valves are built on the principle of a pipe damper.These are also called butterfly damper valves.The flow control element in butterfly valve is a disk of approximately the same diameter as the inside diameter of the adjoining pipe, which rotates on either a vertical or horizontal axis. 

When the disk lies parallel to the piping run, the valve is fully opened. When the disk of this rotary valve approaches the perpendicular position, the valve is closed.In butterfly valves intermediate positions can also be attained for throttling purposes.Intermediate position in butterfly valves are usually achieved by handle-locking devices.

Larger butterfly valves are actuated by hand wheels connected to the stem through gears that provide mechanical advantage at the expense of speed.Butterfly valves may be motor operated or motorized ,air operated or pneumatically actuated also.

Advantages of Butterfly Valves

Butterfly valves have many advantages over gate, globe, plug, and ball valves, especially for large industrial applications of valve.

• Butterfly valves present savings in weight, space, and cost.
• The maintenance costs of butterfly valves are usually low because there are a minimal number of moving parts .
• Also in butterfly valves there are no narrow spaces or pockets where fluid can be trapped.
• Butterfly valves are well-suited for the handling of large fluid flows of liquids or gases that are at relatively low pressures .
• Butterfly valves are also good for the handling of slurries or liquids which have large amounts of suspended solids.

Disadvantages of Butterfly Valves

• Butterfly valves  have limited throttling range .
• Butterfly valves  have although ability to handle slurries but it is limited.
• Butterfly valves  require special seal for tight shuttoff.
• Butterfly valves require high torque required for control.

Types of Butterfly Valves

• The most common and less expensive or standard type is the wafer type butterfly valve  that fits between two pipeline flanges also called flanged butterfly valves.This type is also called general butterfly valve.
• Another type, the lug wafer design, or lug style butterfly valve,is held in place between two pipe  flanges by bolts that join the two flanges and pass through holes in the valve's outer casing.

Butterfly valves are available with conventional flanged ends for bolting to pipe flanges, and in a threaded end construction.

Mechanical assembly of Disk ,Seat and Stem in Butterfly Valve

Butterfly valves stop the flow of fluid by the valve disk that rests on a seat that is on the inside diameter periphery of the valve body. Many butterfly valves have an elastomeric seat against which the disk seals. Other butterfly valves have a seal ring arrangement that uses a clamp-ring and backing-ring on a serrated edged rubber ring. This design prevents extrusion of the O-rings.Metal disk on metal seat (in metal seated butterfly valves) has failed to provide tight seal in butterfly valves.

The stem and disk for a butterfly valve are separate pieces. The disk is bored to receive the stem. Two methods are used to secure the disk to the stem so that the disk rotates as the stem is turned. In the first method, the disk is bored through and secured to the stem with bolts or pins. The alternate method involves boring the disk as before, then shaping the upper stem bore to fit a squared or hex-shaped stem. This method allows the disk to "float" and seek its center in the seat.

Sealing (Packing or O-ring) in butterfly valves

O-ring seals or conventional stuffing box packing are used in butterfly valves to prevent the leakage or accomplish the valve sealing.If a stuffing box or external O-ring is employed, the fluid passing through the valve will come into contact with the valve stem.

Tilting Disk Check Valve How it Works

What is tilting disk check valve

The tilting disk check valve is self actuated,one way or non return valve similar to the swing check valve. Like the swing check, the tilting disk type keeps fluid resistance and turbulence low because of its straight-through design.The straight through design of tilting disk offers many advantages as compared to other designs.

Tilting disk check valve How it Works

In this self actuated valve, valve  disk lifts off of the seat to open the valve. The airfoil design of the disk allows it to "float" on the flow. Valve disk stops built into the body position the disk for optimum flow characteristics.

A large body cavity in tilting disk check valve helps to minimize flow restriction. As flow decreases, the disk starts closing and seals before reverse flow occurs. The Back pressure against the disk moves it across the soft seal into the metal seat for tight shutoff without slamming. If the reverse flow pressure in tilting disk check valve is insufficient to cause a tight seal, the valve may be fitted with an external lever and weight.

Installation and application of Tilting Disc Check Valves

Tilting disc check valves may be installed in horizontal and vertical positions.Tilting disk check valves are available in variety of designs.Some valves are available with a soft seal ring, metal seat seal, or a metal-to-metal seal. The latter is recommended for high temperature operation. The soft seal rings are replaceable, but the valve must be removed from the line to make the replacement. HVAC engineers should also demand valve drawing and complete maintenance schedule from supplier to keep it in correct and optimized working condition.

Butterfly Check Valve How it Works

What is a Butterfly Check Valve?

Butterfly valve is self actuated ,one way ,Non-return valve which allows flow in one direction only.Butterfly check valves have a same disk and seat  arrangement similar as in butterfly control valves. Flow characteristics of butterfly  check valves are similar to the flow characteristics of butterfly valves. Therefore butterfly check valve finds its best pair with butterfly control valve.

Construction and Working Principle of Butterfly Check Valve

The construction of butterfly check valve is such that sufficient space is provided for free movement of disk of butterfly check valve.Valve spacers are also not needed in this type of check valves. The butterfly check valve design is based on a flexible sealing member against the bore of the valve body at an angle of 45^o. The short distance the disk must move from full open to full closed reduces  the "slamming" action found in some other types of check valves. 

Because of same flow characteristics ,butterfly check valves have same applications as butterfly control valves. Owing to very quite operation Butterfly check valves have many applications in HVAC (heating ,ventilation and air conditioning ). Simplicity of design also permits their construction in large diameters - up to 72 inches.Seat liners of these valves are also available in many materials which allow HVAC valves manufacturers to provide valves at relatively cheaper rates.Instead of whole body ,seating liners are may be made in corrosion resistant materials .Otherwise we would have expensive valves as in valve constructions with alloys and titanium.

Flexible sealing members of butterfly check valves are available in many materials which has many advantages and disadvantages. Example of flexible materials are Buna-N, Neoprene, Nordel, Hypalon, Viton, Tyon, Urethane, Butyl, Silicone, and TFE as standard, with other materials available on special order. Internals and fasteners are always of the same material as the liner.Butterfly check valve dimensions must match the application.Engineer should work out before invitation of quotations from suppliers as per particular butterfly check valve specification.

Installation of Butterfly Check Valve

Butterfly check valves may be installed horizontally or vertically with the vertical flow either upward or downward.Keep Flow direction from the hinge post end of the this check valve; otherwise, all flow will be stopped.